// This file was generated by gir (https://github.com/gtk-rs/gir)
// from
// from gir-files (https://github.com/gtk-rs/gir-files.git)
// DO NOT EDIT

use glib::{
    prelude::*,
    signal::{connect_raw, SignalHandlerId},
    translate::*,
};
use std::{boxed::Box as Box_, fmt, mem::transmute};

glib::wrapper! {
    ///
    ///
    /// ## Properties
    ///
    ///
    /// #### `bold`
    ///  Writeable
    /// <details><summary><h4>Label</h4></summary>
    ///
    ///
    /// #### `angle`
    ///  The angle that the baseline of the label makes with the horizontal,
    /// in degrees, measured counterclockwise. An angle of 90 reads from
    /// from bottom to top, an angle of 270, from top to bottom. Ignored
    /// if the label is selectable.
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `attributes`
    ///  Readable | Writeable
    ///
    ///
    /// #### `cursor-position`
    ///  Readable
    ///
    ///
    /// #### `ellipsize`
    ///  The preferred place to ellipsize the string, if the label does
    /// not have enough room to display the entire string, specified as a
    /// [`pango::EllipsizeMode`][crate::pango::EllipsizeMode].
    ///
    /// Note that setting this property to a value other than
    /// [`pango::EllipsizeMode::None`][crate::pango::EllipsizeMode::None] has the side-effect that the label requests
    /// only enough space to display the ellipsis "...". In particular, this
    /// means that ellipsizing labels do not work well in notebook tabs, unless
    /// the `GtkNotebook` tab-expand child property is set to [`true`]. Other ways
    /// to set a label's width are [`WidgetExtManual::set_size_request()`][crate::gtk::prelude::WidgetExtManual::set_size_request()] and
    /// [`LabelExtManual::set_width_chars()`][crate::gtk::prelude::LabelExtManual::set_width_chars()].
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `justify`
    ///  Readable | Writeable
    ///
    ///
    /// #### `label`
    ///  The contents of the label.
    ///
    /// If the string contains [Pango XML markup][PangoMarkupFormat], you will
    /// have to set the [`use-markup`][struct@crate::gtk::Label#use-markup] property to [`true`] in order for the
    /// label to display the markup attributes. See also [`LabelExtManual::set_markup()`][crate::gtk::prelude::LabelExtManual::set_markup()]
    /// for a convenience function that sets both this property and the
    /// [`use-markup`][struct@crate::gtk::Label#use-markup] property at the same time.
    ///
    /// If the string contains underlines acting as mnemonics, you will have to
    /// set the [`use-underline`][struct@crate::gtk::Label#use-underline] property to [`true`] in order for the label
    /// to display them.
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `lines`
    ///  The number of lines to which an ellipsized, wrapping label
    /// should be limited. This property has no effect if the
    /// label is not wrapping or ellipsized. Set this property to
    /// -1 if you don't want to limit the number of lines.
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `max-width-chars`
    ///  The desired maximum width of the label, in characters. If this property
    /// is set to -1, the width will be calculated automatically.
    ///
    /// See the section on [text layout][label-text-layout]
    /// for details of how [`width-chars`][struct@crate::gtk::Label#width-chars] and [`max-width-chars`][struct@crate::gtk::Label#max-width-chars]
    /// determine the width of ellipsized and wrapped labels.
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `mnemonic-keyval`
    ///  Readable
    ///
    ///
    /// #### `mnemonic-widget`
    ///  Readable | Writeable
    ///
    ///
    /// #### `pattern`
    ///  Writeable
    ///
    ///
    /// #### `selectable`
    ///  Readable | Writeable
    ///
    ///
    /// #### `selection-bound`
    ///  Readable
    ///
    ///
    /// #### `single-line-mode`
    ///  Whether the label is in single line mode. In single line mode,
    /// the height of the label does not depend on the actual text, it
    /// is always set to ascent + descent of the font. This can be an
    /// advantage in situations where resizing the label because of text
    /// changes would be distracting, e.g. in a statusbar.
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `track-visited-links`
    ///  Set this property to [`true`] to make the label track which links
    /// have been visited. It will then apply the `GTK_STATE_FLAG_VISITED`
    /// when rendering this link, in addition to `GTK_STATE_FLAG_LINK`.
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `use-markup`
    ///  Readable | Writeable
    ///
    ///
    /// #### `use-underline`
    ///  Readable | Writeable
    ///
    ///
    /// #### `width-chars`
    ///  The desired width of the label, in characters. If this property is set to
    /// -1, the width will be calculated automatically.
    ///
    /// See the section on [text layout][label-text-layout]
    /// for details of how [`width-chars`][struct@crate::gtk::Label#width-chars] and [`max-width-chars`][struct@crate::gtk::Label#max-width-chars]
    /// determine the width of ellipsized and wrapped labels.
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `wrap`
    ///  Readable | Writeable
    ///
    ///
    /// #### `wrap-mode`
    ///  If line wrapping is on (see the [`wrap`][struct@crate::gtk::Label#wrap] property) this controls
    /// how the line wrapping is done. The default is `PANGO_WRAP_WORD`, which
    /// means wrap on word boundaries.
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `xalign`
    ///  The xalign property determines the horizontal aligment of the label text
    /// inside the labels size allocation. Compare this to [`halign`][struct@crate::gtk::Widget#halign],
    /// which determines how the labels size allocation is positioned in the
    /// space available for the label.
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `yalign`
    ///  The yalign property determines the vertical aligment of the label text
    /// inside the labels size allocation. Compare this to [`valign`][struct@crate::gtk::Widget#valign],
    /// which determines how the labels size allocation is positioned in the
    /// space available for the label.
    ///
    /// Readable | Writeable
    /// </details>
    /// <details><summary><h4>Misc</h4></summary>
    ///
    ///
    /// #### `xalign`
    ///  The horizontal alignment. A value of 0.0 means left alignment (or right
    /// on RTL locales); a value of 1.0 means right alignment (or left on RTL
    /// locales).
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `xpad`
    ///  The amount of space to add on the left and right of the widget, in
    /// pixels.
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `yalign`
    ///  The vertical alignment. A value of 0.0 means top alignment;
    /// a value of 1.0 means bottom alignment.
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `ypad`
    ///  The amount of space to add on the top and bottom of the widget, in
    /// pixels.
    ///
    /// Readable | Writeable
    /// </details>
    /// <details><summary><h4>Widget</h4></summary>
    ///
    ///
    /// #### `app-paintable`
    ///  Readable | Writeable
    ///
    ///
    /// #### `can-default`
    ///  Readable | Writeable
    ///
    ///
    /// #### `can-focus`
    ///  Readable | Writeable
    ///
    ///
    /// #### `composite-child`
    ///  Readable
    ///
    ///
    /// #### `double-buffered`
    ///  Whether the widget is double buffered.
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `events`
    ///  Readable | Writeable
    ///
    ///
    /// #### `expand`
    ///  Whether to expand in both directions. Setting this sets both [`hexpand`][struct@crate::gtk::Widget#hexpand] and [`vexpand`][struct@crate::gtk::Widget#vexpand]
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `focus-on-click`
    ///  Whether the widget should grab focus when it is clicked with the mouse.
    ///
    /// This property is only relevant for widgets that can take focus.
    ///
    /// Before 3.20, several widgets (GtkButton, GtkFileChooserButton,
    /// GtkComboBox) implemented this property individually.
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `halign`
    ///  How to distribute horizontal space if widget gets extra space, see `GtkAlign`
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `has-default`
    ///  Readable | Writeable
    ///
    ///
    /// #### `has-focus`
    ///  Readable | Writeable
    ///
    ///
    /// #### `has-tooltip`
    ///  Enables or disables the emission of [`query-tooltip`][struct@crate::gtk::Widget#query-tooltip] on `widget`.
    /// A value of [`true`] indicates that `widget` can have a tooltip, in this case
    /// the widget will be queried using [`query-tooltip`][struct@crate::gtk::Widget#query-tooltip] to determine
    /// whether it will provide a tooltip or not.
    ///
    /// Note that setting this property to [`true`] for the first time will change
    /// the event masks of the GdkWindows of this widget to include leave-notify
    /// and motion-notify events. This cannot and will not be undone when the
    /// property is set to [`false`] again.
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `height-request`
    ///  Readable | Writeable
    ///
    ///
    /// #### `hexpand`
    ///  Whether to expand horizontally. See [`WidgetExtManual::set_hexpand()`][crate::gtk::prelude::WidgetExtManual::set_hexpand()].
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `hexpand-set`
    ///  Whether to use the [`hexpand`][struct@crate::gtk::Widget#hexpand] property. See [`WidgetExtManual::is_hexpand_set()`][crate::gtk::prelude::WidgetExtManual::is_hexpand_set()].
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `is-focus`
    ///  Readable | Writeable
    ///
    ///
    /// #### `margin`
    ///  Sets all four sides' margin at once. If read, returns max
    /// margin on any side.
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `margin-bottom`
    ///  Margin on bottom side of widget.
    ///
    /// This property adds margin outside of the widget's normal size
    /// request, the margin will be added in addition to the size from
    /// [`WidgetExtManual::set_size_request()`][crate::gtk::prelude::WidgetExtManual::set_size_request()] for example.
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `margin-end`
    ///  Margin on end of widget, horizontally. This property supports
    /// left-to-right and right-to-left text directions.
    ///
    /// This property adds margin outside of the widget's normal size
    /// request, the margin will be added in addition to the size from
    /// [`WidgetExtManual::set_size_request()`][crate::gtk::prelude::WidgetExtManual::set_size_request()] for example.
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `margin-left`
    ///  Margin on left side of widget.
    ///
    /// This property adds margin outside of the widget's normal size
    /// request, the margin will be added in addition to the size from
    /// [`WidgetExtManual::set_size_request()`][crate::gtk::prelude::WidgetExtManual::set_size_request()] for example.
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `margin-right`
    ///  Margin on right side of widget.
    ///
    /// This property adds margin outside of the widget's normal size
    /// request, the margin will be added in addition to the size from
    /// [`WidgetExtManual::set_size_request()`][crate::gtk::prelude::WidgetExtManual::set_size_request()] for example.
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `margin-start`
    ///  Margin on start of widget, horizontally. This property supports
    /// left-to-right and right-to-left text directions.
    ///
    /// This property adds margin outside of the widget's normal size
    /// request, the margin will be added in addition to the size from
    /// [`WidgetExtManual::set_size_request()`][crate::gtk::prelude::WidgetExtManual::set_size_request()] for example.
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `margin-top`
    ///  Margin on top side of widget.
    ///
    /// This property adds margin outside of the widget's normal size
    /// request, the margin will be added in addition to the size from
    /// [`WidgetExtManual::set_size_request()`][crate::gtk::prelude::WidgetExtManual::set_size_request()] for example.
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `name`
    ///  Readable | Writeable
    ///
    ///
    /// #### `no-show-all`
    ///  Readable | Writeable
    ///
    ///
    /// #### `opacity`
    ///  The requested opacity of the widget. See [`WidgetExtManual::set_opacity()`][crate::gtk::prelude::WidgetExtManual::set_opacity()] for
    /// more details about window opacity.
    ///
    /// Before 3.8 this was only available in GtkWindow
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `parent`
    ///  Readable | Writeable
    ///
    ///
    /// #### `receives-default`
    ///  Readable | Writeable
    ///
    ///
    /// #### `scale-factor`
    ///  The scale factor of the widget. See [`WidgetExtManual::scale_factor()`][crate::gtk::prelude::WidgetExtManual::scale_factor()] for
    /// more details about widget scaling.
    ///
    /// Readable
    ///
    ///
    /// #### `sensitive`
    ///  Readable | Writeable
    ///
    ///
    /// #### `style`
    ///  The style of the widget, which contains information about how it will look (colors, etc).
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `tooltip-markup`
    ///  Sets the text of tooltip to be the given string, which is marked up
    /// with the [Pango text markup language][PangoMarkupFormat].
    /// Also see `gtk_tooltip_set_markup()`.
    ///
    /// This is a convenience property which will take care of getting the
    /// tooltip shown if the given string is not [`None`]: [`has-tooltip`][struct@crate::gtk::Widget#has-tooltip]
    /// will automatically be set to [`true`] and there will be taken care of
    /// [`query-tooltip`][struct@crate::gtk::Widget#query-tooltip] in the default signal handler.
    ///
    /// Note that if both [`tooltip-text`][struct@crate::gtk::Widget#tooltip-text] and [`tooltip-markup`][struct@crate::gtk::Widget#tooltip-markup]
    /// are set, the last one wins.
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `tooltip-text`
    ///  Sets the text of tooltip to be the given string.
    ///
    /// Also see `gtk_tooltip_set_text()`.
    ///
    /// This is a convenience property which will take care of getting the
    /// tooltip shown if the given string is not [`None`]: [`has-tooltip`][struct@crate::gtk::Widget#has-tooltip]
    /// will automatically be set to [`true`] and there will be taken care of
    /// [`query-tooltip`][struct@crate::gtk::Widget#query-tooltip] in the default signal handler.
    ///
    /// Note that if both [`tooltip-text`][struct@crate::gtk::Widget#tooltip-text] and [`tooltip-markup`][struct@crate::gtk::Widget#tooltip-markup]
    /// are set, the last one wins.
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `valign`
    ///  How to distribute vertical space if widget gets extra space, see `GtkAlign`
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `vexpand`
    ///  Whether to expand vertically. See [`WidgetExtManual::set_vexpand()`][crate::gtk::prelude::WidgetExtManual::set_vexpand()].
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `vexpand-set`
    ///  Whether to use the [`vexpand`][struct@crate::gtk::Widget#vexpand] property. See [`WidgetExtManual::is_vexpand_set()`][crate::gtk::prelude::WidgetExtManual::is_vexpand_set()].
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `visible`
    ///  Readable | Writeable
    ///
    ///
    /// #### `width-request`
    ///  Readable | Writeable
    ///
    ///
    /// #### `window`
    ///  The widget's window if it is realized, [`None`] otherwise.
    ///
    /// Readable
    /// </details>
    ///
    /// # Implements
    ///
    /// [`trait@gtk::prelude::LabelExt`], [`trait@gtk::prelude::WidgetExt`], [`trait@glib::ObjectExt`], [`trait@gtk::prelude::BuildableExt`]
    #[doc(alias = "DzlBoldingLabel")]
    pub struct BoldingLabel(Object<ffi::DzlBoldingLabel, ffi::DzlBoldingLabelClass>) @extends gtk::Label, gtk::Widget, @implements gtk::Buildable;

    match fn {
        type_ => || ffi::dzl_bolding_label_get_type(),
    }
}

impl BoldingLabel {
    #[doc(alias = "dzl_bolding_label_new")]
    pub fn new(str: &str, bold: bool) -> BoldingLabel {
        assert_initialized_main_thread!();
        unsafe {
            from_glib_none(ffi::dzl_bolding_label_new(
                str.to_glib_none().0,
                bold.into_glib(),
            ))
        }
    }

    #[doc(alias = "dzl_bolding_label_new_with_mnemonic")]
    #[doc(alias = "new_with_mnemonic")]
    pub fn with_mnemonic(str: &str, bold: bool) -> BoldingLabel {
        assert_initialized_main_thread!();
        unsafe {
            from_glib_none(ffi::dzl_bolding_label_new_with_mnemonic(
                str.to_glib_none().0,
                bold.into_glib(),
            ))
        }
    }

    #[doc(alias = "dzl_bolding_label_set_bold")]
    pub fn set_bold(&self, bold: bool) {
        unsafe {
            ffi::dzl_bolding_label_set_bold(self.to_glib_none().0, bold.into_glib());
        }
    }

    #[doc(alias = "dzl_bolding_label_set_weight")]
    pub fn set_weight(&self, weight: pango::Weight) {
        unsafe {
            ffi::dzl_bolding_label_set_weight(self.to_glib_none().0, weight.into_glib());
        }
    }

    #[doc(alias = "bold")]
    pub fn connect_bold_notify<F: Fn(&Self) + 'static>(&self, f: F) -> SignalHandlerId {
        unsafe extern "C" fn notify_bold_trampoline<F: Fn(&BoldingLabel) + 'static>(
            this: *mut ffi::DzlBoldingLabel,
            _param_spec: glib::ffi::gpointer,
            f: glib::ffi::gpointer,
        ) {
            let f: &F = &*(f as *const F);
            f(&from_glib_borrow(this))
        }
        unsafe {
            let f: Box_<F> = Box_::new(f);
            connect_raw(
                self.as_ptr() as *mut _,
                b"notify::bold\0".as_ptr() as *const _,
                Some(transmute::<_, unsafe extern "C" fn()>(
                    notify_bold_trampoline::<F> as *const (),
                )),
                Box_::into_raw(f),
            )
        }
    }
}

impl fmt::Display for BoldingLabel {
    fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
        f.write_str("BoldingLabel")
    }
}